天玺体育最火网上大全

AD8315 Datasheet

  • AD8315

  • 50 dB GSM PA Controller

  • 930.75KB

  • 21页

  • AD

扫码查看芯片数据手册

上传产品规格书

PDF预览

50 dB GSM PA Controller
AD8315
FEATURES
Complete RF Detector/Controller Function
>50 dB Range at 0.9 GHz (鈥?9 dBm to +2 dBm re 50 )
Accurate Scaling from 0.1 GHz to 2.5 GHz
Temperature-Stable Linear-in-dB Response
Log Slope of 23 mV/dB, Intercept at 鈥?0 dBm at 0.9 GHz
True Integration Function in Control Loop
Low Power: 20 mW at 2.7 V, 38 mW at 5 V
Power Down to 10.8 W
APPLICATIONS
Single, Dual, and Triple Band Mobile Handset
(GSM, DCS, EDGE)
Transmitter Power Control
Its high sensitivity allows control at low signal levels, thus reduc-
ing the amount of power that needs to be coupled to the detector.
For convenience, the signal is internally ac-coupled. This
high-pass coupling, with a corner at approximately 0.016 GHz,
determines the lowest operating frequency. Thus, the source
may be dc grounded.
The AD8315 provides a voltage output, VAPC, that has the
voltage range and current drive to directly connect to most hand-
set power amplifiers鈥?gain control pin. VAPC can swing from 250
mV above ground to within 200 mV below the supply voltage.
Load currents of up to 6 mA can be supported.
The setpoint control input is applied to pin VSET and has an
operating range of 0.25 V鈥?.4 V. The associated circuit deter-
mines the slope and intercept of the linear-in-dB measurement
system; these are nominally 23 mV/dB and 鈥?0 dBm for a 50
W
termination (鈥?3 dBV) at 0.9 GHz. Further simplifying the
application of the AD8315, the input resistance of the setpoint
interface is over 100 MW, and the bias current is typically 0.5
mA.
The AD8315 is available in MSOP and lead frame chip scale
(LFCSP) packages and consumes 8.5 mA from a 2.7 V to 5.5 V
supply. When powered down, the sleep current is 4
mA.
PRODUCT DESCRIPTION
The AD8315 is a complete low cost subsystem for the precise
control of RF power amplifiers operating in the frequency range
0.1 GHz鈥?.5 GHz and over a typical dynamic range of 50 dB. It is
intended for use in cellular handsets and other battery-operated
wireless devices. The log amp technique provides a much wider
measurement range and better accuracy than controllers using
diode detectors. In particular, its temperature stability is excellent
over a specified range of 鈥?0鈭濩 to +85鈭濩.
FUNCTIONAL BLOCK DIAGRAM
VPOS
ENBL
LOW NOISE
GAIN BIAS
LOW NOISE
BAND GAP
REFERENCE
OUTPUT
ENABLE
DELAY
1.35
VAPC
DET
RFIN
10dB
DET
DET
DET
DET
HI-Z
LOW NOISE (25nV/ Hz)
RAIL-TO-RAIL BUFFER
10dB
10dB
10dB
V-I
FLTR
VSET
23mV/dB
250mV to
1.4V = 50dB
OFFSET
COMP鈥橬
COMM
INTERCEPT
POSITIONING
REV. B
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703
漏 2003 Analog Devices, Inc. All rights reserved.

AD8315相关型号PDF文件下载

您可能感兴趣的PDF文件资料

热门IC型号推荐

扫码下载APP，
 一键连接广大的电子世界。

在线人工客服

买家服务：
卖家服务：
技术客服：

0571-85317607

网站技术支持

13606545031

客服在线时间周一至周五
 9:00-17:30

关注官方微信号，
第一时间获取资讯。

建议反馈
返回顶部

建议反馈

联系人：

联系方式：

按住滑块，拖拽到最右边
>>
感谢您向阿库提出的宝贵意见，您的参与是维库提升服务的动力！意见一经采纳，将有感恩红包奉上哦！